PLANET XGS3-24040 - Manual (Page 784)

47-2
Switch(config) #aaa-accounting update disable
47.4 debug aaa packet
Command: debug aaa packet {send|receive|all} interface{ethernet |
}
no debug aaa packet {send|receive|all} interface{ethernet |
}
Function: Enable the debug information of AAA about receiving and sending packets; the no operation
of this command will disable such debug information.
Parameters: send: Enable the debug information of AAA about sending packets.
receive: Enable the debug information of AAA about receiving packets.
all: Enable the debug information of AAA about both sending and receiving packets.
<interface-number>: the number of interface.
<interface-name>: the name of interface.
Command Mode: Admin Mode.
Usage Guide: By enabling the debug information of AAA about sending and receiving packets, users
can check the messages received and sent by Radius protocol, which might help diagnose the cause of
faults if there is any.
Example: Enable the debug information of AAA about sending and receiving packets on interface1/1.
Switch#debug aaa packet all interface Ethernet 1/1
47.5 debug aaa detail attribute
Command: debug aaa detail attribute interface {ethernet <interface-number>| <interface-name>}
no debug aaa detail attribute interface {ethernet <interface-number>|
<interface-name>}
Function: Enable the debug information of AAA about Radius attribute details; the no operation of this
command will disable that debug information.
Parameters: : the number of the interface.
<interface-name>: the name of the interface.
Command Mode: Admin Mode.
Usage Guide: By enabling the debug information of AAA about Radius attribute details, users can check
Radius attribute details of Radius messages, which might help diagnose the cause of faults if there is
any.
Example: Enable the debug information of AAA about Radius attribute details on interface 1/1.
Switch#debug detail attribute interface Ethernet 1/1
47.6 debug aaa detail connection
Command: debug aaa detail connection
no debug aaa detail connection
Function: Enable the debug information of AAA about connection details; the no operation of this
command will disable that debug information.