PLANET XGS3-24040 - Manual (Page 509)

34-222
34.33 show ipv6 ospf neighbor
Command: show ipv6 ospf [] neighbor [<neighbor_id> | detail | detail ]
Function: Show OSPF adjacent point messages.
Parameter: is process tag, which is a character string
<neighbor_id> is the neighbor ID shown in IPv4 address format
detail: Show neighbor details
<ifname> name of the interface
Default: Not displayed
Command Mode: All modes
Usage Guide: OSPF neighbor state can be checked by viewing the output of this command.
Example:
OSPFv3 Process (*null*)
Neighbor ID Pri State Dead Time Interface Instance ID
192.168.2.3 1 Full/Backup 00:00:29 Vlan1 0
192.168.2.1 1 Full/DR 00:00:38 Vlan2 0 Vlan1
Displayed information
Explanation
Neighbor ID
Neighbor ID
Instance ID
Instance ID
Address
IP address of neighboring layer 3 switch
Interface
Interface the neighbor belongs
State
Neighbor relationship state
Pri
Priority
34.34 show ipv6 ospf route
Command: show ipv6 ospf [] route
Function: Show the OSPF route table messages.
Parameter: is the processes tag, which is a character string.