PLANET XGS3-24040 - Manual (Page 510)

34-223
Default: Not displayed
Command Mode: All modes
Example:
Switch#show ipv6 ospf route
Codes: C - connected, D - Discard, O - OSPF, IA - OSPF inter area
E1 - OSPF external type 1, E2 - OSPF external type 2
Destination Metric
Next-hop
O 2000:1:1::/64 10
directly connected, Vlan2
O 2001:1:1::/64 10
directly connected, Vlan1
O 3000:1:1::/64 20
via fe80::203:fff:fe01:429e, Vlan2
O 3003:1:1::/64 20
via fe80::203:fff:fe01:d28, Vlan1
34.35 show ipv6 ospf redistribute
Command: show ip ospf v6 [<process-tag>] redistribute
Function: To display the routing message redistributed from external process of OSPF.
Parameter: IPv6 OSPF is the tag ID, to display all routing messages redistributed from external process
of IPv6 OSPF if there is no parameter.
Default: None.
Command Mode: Admin Mode and Configuration Mode.
Usage Guide: None.
Example:
Switch#show ipv6 ospf redistribute
ospf process abc redistribute information：
ospf process def
bgp
ospf process def redistribute information：
ospf process abc