PLANET XGS3-24040 - Manual (Page 65)

XGS3 Command Guide
1-65
Function:
Display the configured SSH usernames.
Command Mode:
Admin Mode.
Example:
Switch#show ssh-user
test
Relative Command:
ssh-user, ssh-server enable, no ssh-server enable
1.2.19 show telnet login
Command:
show telnet login
Function:
Display the information of the Telnet client which currently establishes a Telnet connection with the switch.
Command Mode:
Admin and Configuration Mode.
Usage Guide:
Check the Telnet client messages connected through Telnet with the switch.
Example:
Switch#show telnet login
Authenticate login by local
Login user:
aa
1.3 Commands for Configuring Switch IP
1.3.1 interface vlan
Command:
interface vlan
no interface vlan
Function:
Enter the VLAN interface configuration mode; the no operation of this command will delete the existing VLAN
interface.
Parameters:
<vlan-id> is the VLAN ID of an existing VLAN, ranging from 1 to 4094.
Command Mode:
Global Configuration Mode.
Usage Guide:
Users should first make sure the existence of a VLAN before configuring it. User “exit” command to quit the VLAN
interface configuration mode back to the global configuration mode.
Example:
Enter the VLAN interface configuration mode of VLAN1.