PLANET XGS3-24040 - Manual (Page 681)

XGS3 Command Guide
39-13
39.3.2 debug ipv6 pim events
Command: debug ipv6 pim events
no debug ipv6 pim events
Function: Enable or Disable pim events debug switch
Parameter: None
Default: Disabled
Command Mode: Admin Mode.
Usage Guide: Enable “pim events debug” switch and display events information about pim operation.
Example:
Switch# debug ipv6 pim events
39.3.3 debug ipv6 pim mfc
Command: debug ipv6 pim mfc（in|out|）
no debug ipv6 pim mfc（in|out|）
Function: Enable or Disable pim mfc debug switch.
Parameter: None
Default: Disabled
Command Mode: Admin Mode.
Usage Guide: Enable pim mfc debug switch and display generated and transmitted multicast id’s
information.
Example:
Switch# debug ipv6 pim mfc in
39.3.4 debug ipv6 pim mib
Command: debug ipv6 pim mib
no ipv6 debug pim mib
Function: Enable or Disable PIM MIB debug switch.
Parameter: None
Default: Disabled
Command Mode: Admin Mode.
Usage Guide: Inspect PIM MIB information by PIM MIB debug switch. It’s not available now and it’s for
the future extension.
Example:
Switch# debug ipv6 pim mib
39.3.5 debug ipv6 pim nexthop
Command: debug ipv6 pim nexthop
no debug ipv6 pim nexthop
Function: Enable or Disable pim nexthop debug switch.
Parameter: None