PLANET XGS3-24040 - Manual (Page 642)

XGS3 Command Guide
38-71
38.8.12 show ip multicast policy
Command: show ip multicast policy
Function: Display multicast policy of configuration
Parameter: None
Default: None
Command Mode: Admin Mode and Global Mode
Usage Guide: The command displays multicast policy of configuration
Example:
Switch#show ip multicast policy
ip multicast-policy 10.1.1.0/24 225.0.0.0/8 cos 5
38.8.13 show ip multicast source-control
Command: show ip multicast source-control [detail]
show ip multicast source-control interface [detail]
Function: Display multicast source control configuration
Parameter: detail: expresses if it displays information in detail.
: interface name, such as Ethernet 1/1 or ethernet1/1.
Default: None
Command Mode: Admin Mode and Global Mode
Usage Guide: The command displays multicast source control rules of configuration, including detail
option, and access-list information applied in detail.
Example:
Switch#show ip multicast source-control detail
ip multicast source-control is enabled
Interface Ethernet1/13 use multicast source control access-list 5000
access-list 5000 permit ip 10.1.1.0 0.0.0.255 232.0.0.0 0.0.0.255
access-list 5000 deny ip 10.1.1.0 0.0.0.255 233.0.0.0 0.255.255.255
38.8.14 show ip multicast source-control access-list
Command: show ip multicast source-control access-list
show ip multicast source-control access-list <5000-5099>
Function: Display source control multicast access-list of configuration
Parameter: <5000-5099>: access-list number
Default: None
Command Mode: Admin Mode and Global Mode
Usage Guide: The command displays source control multicast access-list of configuration
Example:
Switch#sh ip multicast source-control access-list
access-list 5000 permit ip 10.1.1.0 0.0.0.255 232.0.0.0 0.0.0.255
access-list 5000 deny ip 10.1.1.0 0.0.0.255 233.0.0.0 0.255.255.255