PLANET XGS3-24040 - Manual (Page 794)

48-2
Default: Not configure.
Usage Guide: If this command is used to configure the secure cipher suite, specified encryption method
will be used. The SSL should be restarted to take effect after changes on configuration. When
des-cbc-sha is configured, IE 7.0 or above is required.
Example: Configure the secure cipher suite is rc4-128-sha.
Switch(config)# ip http secure- ciphersuite rc4-128-sha
48.4 show ip http secure-server status
Command: show ip http secure-server status
Function: Show the status for the configured SSL.
Parameter: None.
Command Mode: Admin and Configuration Mode.
Example:
Switch# show ip http secure-server status
HTTP secure server status: Enabled
HTTP secure server port: 1028
HTTP secure server ciphersuite: rc4-128-sha
48.5 debug ssl
Command: debug ssl
no debug ssl
Function: Show the configured SSL information, the no command closes the DEBUG.
Parameter: None.
Command Mode: Admin Mode.
Example:
Switch# debug ssl
%Jan 01 01:02:05 2006 ssl will to connect to web server 127.0.0.1:9998
%Jan 01 01:02:05 2006 connect to http security server success!