PLANET XGS3-24040 - Manual (Page 600)

XGS3 Command Guide
38-29
Parameter: None
Default: None
Command Mode: Admin Mode and Global Mode
Usage Guide: Display multicast router neighbors maintained by the PIM
Example:
Switch (config)#show ip pim neighbor
Neighbor Interface Uptime/Expires Ver DR
Address Priority/Mode
10.1.6.1 Vlan1 00:00:10/00:01:35 v2 1 /
10.1.6.2 Vlan1 00:00:13/00:01:32 v2 1 /
10.1.4.2 Vlan3 00:00:18/00:01:30 v2 1 /
10.1.4.3 Vlan3 00:00:17/00:01:29 v2 1 /
Displayed Information
Explanations
Neighbor Address
Neighbor address
Interface
Neighbor interface
Uptime/Expires
Running time /overtime
Ver
Pim version ,v2 usually
DR Priority/Mode
DR priority in the hello messages from the
neighbor and if the neighbor is the interface’s DP.
38.3.36 show ip pim nexthop
Command: show ip pim nexthop
Function: Display the PIM buffered nexthop router in the unicast route table
Parameter: None
Default: None
Command Mode: Admin Mode and Global Mode
Usage Guide: Display the PIM buffered nexthop router information.