PLANET XGS3-24040 - Manual (Page 651)

XGS3 Command Guide
38-80
38.9.16 show ip igmp interface
Command: show ip igmp interface {vlan |}
Function: Display related IGMP information on interface.
Parameter: is interface name, namely displaying IGMP information of specified interface.
Default: Do not display
Command Mode: Admin Mode
Example: Display interface vlan1 IGMP message on Ethernet.
Switch (config)#show ip igmp interface Vlan1
Interface Vlan1(2005)
Index 2005
Internet address is 10.1.1.2
IGMP querier
IGMP current version is V3, 2 group(s) joined
IGMP query interval is 125 seconds
IGMP querier timeout is 255 seconds
IGMP max query response time is 10 seconds
Last member query response interval is 1000 ms
Group Membership interval is 260 seconds
IGMP is enabled on interface
38.10 Commands for IGMP Snooping
38.10.1 clear ip igmp snooping vlan
Command: clear ip igmp snooping vlan <1-4094> groups [A.B.C.D]
Function: Delete the group record of the specific VLAN.
Parameters: <1-4094> the specific VLAN ID; A.B.C.D the specific group address.
Command Mode: Admin Configuration Mode
Usage Guide: Use show command to check the deleted group record.
Example: Delete all groups.
Switch#clear ip igmp snooping vlan 1 groups
Relative Command: show ip igmp snooping vlan <1-4094>
38.10.2 clear ip igmp snooping vlan <1-4094>
mrouter-port
Command: clear ip igmp snooping vlan <1-4094> mrouter-port [ethernet IFNAME | IFNAME]
Function: Delete the mrouter port of the specific VLAN.
Parameters: <1-4094> the specific VLAN ID; ethernet the Ethernet port name; IFNAME the port name.
Command Mode: Admin Configuration Mode
Usage Guide: Use show command to check the deleted mrouter port of the specific VLAN.
Example: Delete mrouter port in vlan 1.