PLANET XGS3-24040 - Manual (Page 713)

XGS3 Command Guide
39-45
Example: Delete all groups.
Switch#clear ipv6 mld group
Relative Command: show ipv6 mld group
39.7.2 debug ipv6 mld events
Command: debug ipv6 mld events
no debug ipv6 mld events
Function: Enable the debug switch that displays MLD events. The “no debug ipv6 mld events”
command disables the debug switch.
Parameter: None.
Default: Disabled.
Command Mode: Admin Mode.
Usage Guide: This switch can be enabled to get MLD events information.
Example:
Switch#1970/01/01 07:30:13 IMI: MLD Report recv: src fe80::203:fff:fe12:3457 for ff1e::1:3
1970/01/01 07:30:13 IMI: Processing Report comes from Vlan1, ifindex 2003
1970/01/01 07:30:13 IMI: MLD(Querier) ff1e::1:3 (Vlan1): No Listeners --> Listeners Present
Switch# debug ipv6 mld events
Switch#1970/01/01 07:30:13 IMI: MLD Report recv: src fe80::203:fff:fe12:3457 for ff1e::1:3
1970/01/01 07:30:13 IMI: Processing Report comes from Vlan1, ifindex 2003
1970/01/01 07:30:13 IMI: MLD(Querier) ff1e::1:3 (Vlan1): No Listeners --> Listeners Present
39.7.3 debug ipv6 mld packet
Command: debug ipv6 mld packet
no debug ipv6 mld packet
Function: Enable the debug switch that displays MLD packets. The “no debug ipv6 mld events”
command disables the debug switch.
Parameter: None
Default: Disabled
Command Mode: Admin Mode
Usage Guide: This switch can be enabled to get MLD packets information.
Example:
Switch# deb ipv6 mld packet
Switch#1970/01/01 07:33:12 IMI: Recv MLD packet
1970/01/01 07:33:12 IMI: Type: Listener Report (131)
1970/01/01 07:33:12 IMI: Code: 0
1970/01/01 07:33:12 IMI: Checksum: 3b7a
1970/01/01 07:33:12 IMI: Max Resp Delay: 0