PLANET XGS3-24040 - Manual (Page 104)

XGS3 Command Guide
3-104
ID: 1
Member status: Inactive member (user_config)
IP Address: 10.254.254.2
MAC Address: 00-01-02-03-04-06
Description: DCRS-9808
Hostname: DSW102
3.16 show cluster candidates
Command:
show cluster candidates [nodes-sn | mac-address ]
Function:
Display the statistic information of the candidate member switches on the command switch
Parameter:
candidate-sn-list：candidate switch sn, ranging from 1 to 256. More than one switch can be specified.
mac-address： mac address of the candidate switch
Default:
No parameters means to display information of all member switches.
Command Mode:
Admin and Configuration Mode.
Usage Guide:
Executing this command on the switch will display the information of the candidate member switches.
Example:
Display configuration information of all cluster candidate switches.
Switch#show cluster candidates
Cluster Candidates:
SN Mac Description Hostname
--- ----------------- ------------------------ ------------------------
xxx xx-xx-xx-xx-xx-xx xxxxxxxxxxxxxxxxxxxxxx24 xxxxxxxxxxxxxxxxxxxxxx24
1 00-01-02-03-04-06 XGS3-24040
2 01-01-02-03-04-05 XGS3-24040 MIS_zebra
3.17 show cluster topology
Command:
show cluster topology [root-sn | nodes-sn | mac-address ]
Function:
Display cluster topology information. This command only applies to commander switches.
Parameters:
starting-node-sn：the starting node of the topology.
node-sn-list：the switch node sn.
mac-addr：the CPU mac address of the switch.
No parameters means to display all topology information.
Command Mode:
Admin and Configuration Mode.