PLANET XGS3-24040 - Manual (Page 130)

XGS3 Command Guide
7-130
Function:
To configure ULDP to work in aggressive mode. The no form of this command will restore the normal mode.
Parameters:
None.
Command Mode:
Global Configuration Mode and Port Configuration Mode.
Default:
Normal mode.
Usage Guide:
The ULDP working mode can be configured only if it is enabled globally. When ULDP aggressive mode is enabled
globally, all the existing fiber ports will work in aggressive mode. For the copper ports and fiber ports which are
available after the configuration is available, aggressive mode should be enabled in port configuration mode.
Example:
To enable ULDP aggressive mode globally.
Switch(config)# uldp aggressive-mode
7.5 uldp manual-shutdown
Command:
uldp manual-shutdown
no uldp manual-shutdown
Function:
To configure ULDP to work in manual shutdown mode. The no command will restore the automatic mode.
Parameters:
None.
Command Mode:
Global Configuration Mode.
Default:
Auto mode.
Usage Guide:
This command can be issued only if ULDP has been enabled globally.
Example:
To enable manual shutdown globally.
Switch(config)# uldp manual-shutdown
7.6 uldp reset
Command:
uldp reset
Function:
To reset the port when ULDP is shutdown.
Parameters:
None.
Command Mode:
Globally Configuration Mode and Port Configuration Mode.