14 ipv6 access standard, 15 ipv6 access extended, 16 {ip|ipv6|mac|mac-ip} access-group – PLANET XGS3-24040 User Manual
Page 739: Access standard, Access extended, Access, Group
![background image](https://www.manualsdir.com/files/865186/content/doc739.png)
Commands for Security Function Chapter 2 Commands for 802.1x
41-11
2003:1:2::1/48 pass through.
Switch (config)#ipv6 access-list 520 deny 2003:1:2:::1/48
Switch (config)#ipv6 access-list 520 permit 2003:1:2:3::1/64
Switch (config)#ipv6 access-list 520 deny 2003:1:2:::1/48
41.14 ipv6 access standard
Command: ipv6 access-list standard
no ipv6 access-list standard
Function: Create a name-based standard IPv6 access list; the “no ipv6 access-list
standard
Parameter:
Command Mode: Global Mode.
Default: No access list is configured by default.
Usage Guide: When this command is run for the first time, only an empty access list with no entry will be
created.
Example: Create a standard IPv6 access list named “ip6Flow”.
Switch(config)#ipv6 access-list standard ip6Flow
Switch(config)#ipv6 access-list standard ip6Flow
41.15 ipv6 access extended
Command: ipv6 access-list extended
no ipv6 access-list extended
Function: Create a name-based extended IPv6 access list; the “no ipv6 access-list extended
command delete the name-based extended IPv6 access list.
Parameter:
Command Mode: Global Mode.
Default: No IP address is configured by default.
Usage Guide: When this command is run for the first time, only an empty access list with no entry will be
created.
Example: Create an extensive IPv6 access list named “tcpFlow”.
Switch (config)#ipv6 access-list extended tcpFlow
41.16 {ip|ipv6|mac|mac-ip} access-group
Command: {ip|ipv6|mac|mac-ip} access-group
no {ip|mac} access-group
Function: Apply an access-list on some direction of port, and determine if ACL rule is added statistic
counter or not by options; the no command deletes access-list binding on the port.
Parameter:
Command Mode: Physical Port Mode