14 show mls qos aggregate-policy, 15 show mls qos interface, Show mls qos aggregate – PLANET XGS3-24040 User Manual
Page 231: Policy, Show mls qos interface
14-97
Name of the class map referred to
police 16000000 2000 conform-action drop exceed-action transmit
Policy implemented
14.14 show mls qos aggregate-policy
Command:
show mls qos aggregate-policy [<aggregate-policy-name>]
Function:
Displays policy set configuration information for QoS.
Parameters:
<aggregate-policy-name> is the policy set name.
Default:
N/A.
Command mode:
Admin and Configuration Mode.
Usage Guide:
Displays all QoS policy or specified QoS policy information.
Example:
Switch(config)#show mls qos aggregate-policy a2
aggregate policy a2 10 10 10 conform-action set-dscp-transmit 7
Not used by any policy map
Displayed information
Explanation
aggregate policy a2 10 10 10 conform-action set-dscp-transmit 7
Configuration for this policy set.
Not used by any policy map
Time that the policy set is being referred to
14.15 show mls qos interface
Command:
show mls qos interface [<interface-id>] [buffers | policy | queuing | statistics ]
Function:
Displays QoS configuration information on a port.