PLANET XGS3-24040 - Manual (Page 771)

43-7
Default Settings: None
Usage Guide: Display the debug information of the number of dynamic ARP on the port.
Examples:
Switch#debug switchport arp count
%Jun 14 16:04:40 2007 Current arp count 21 is more than or equal to the maximum limit in port
Ethernet1/1
!!%Jun 14 16:04:40 2007 Arp learning will be stopped and some mac will be delete !!
43.13 debug switchport nd count
Command: debug switchport nd count
no debug switchport nd count
Function: When the number limitation function debug of ND on the port, if the number of dynamic ND
and the number of ND on the port is larger than the max number allowed, users will see debug
information.” no debug switchport nd count” command is used to disable the number limitation function
debug of ND on the port.
Parameters: None
Command Mode: Admin Mode
Default Settings: None
Usage Guide: Display the debug information of the number of dynamic ND on the port
Examples:
Switch#debug switchport arp count
%Jun 14 16:04:40 2007 Current neighbor count 21 is more than or equal to the maximum limit
in port Ethernet1/1
!!%Jun 14 16:04:40 2007 Neighbor learning will be stopped and some mac will be delete !!
43.14 debug vlan mac count
Command: debug vlan mac count
no debug vlan mac count
Function: When the number limitation function debug of MAC in the VLAN, if the number of dynamic
MAC and the number of MAC in the VLAN is larger than the max number allowed, users will see debug
information.” no debug vlan mac count” command is used to disable the number limitation function
debug of MAC in the VLAN.
Parameters: None.
Command Mode: Admin Mode.
Default Settings: None.
Usage Guide: Display the debug information of the number of dynamic MAC in the VLAN.
Examples:
Switch#debug vlan mac count
%Jun 14 16:04:40 2007 Current mac count 21 is more than or equal to the maximum limit in
vlan 1!!
%Jun 14 16:04:40 2007 Mac learning will be stopped and some mac will be delete !!