PLANET XGS3-24040 - Manual (Page 133)

XGS3 Command Guide
7-133
7.11 debug uldp event
Command:
debug uldp event
no debug uldp event
Function:
Enable the message debug function to display the event; the no form command disables this function.
Parameter:
None.
Command Mode:
Admin Mode.
Default:
Disabled.
Usage Guide:
Use this command to display all kinds of event information.
Example:
Display event information.
Switch# debug uldp event
7.12 debug uldp packet
Command:
debug uldp packet [receive|send]
no debug uldp packet [receive|send]
Function:
Enable receives and sends packet debug function, after that. Display the type and interface of the packet which
receiving and sending on the client. The no form command disables this function.
Parameter:
None.
Command Mode:
Admin Mode.
Default:
Disabled.
Usage Guide:
Use this command to display the packet that receiving on each interface.
Switch# debug uldp packet receive
7.13 debug uldp interface ethernet
Command:
debug uldp {hello|probe|echo|unidir|all}[receive|send] interface ethernet <IFname>
no debug uldp {hello|probe|echo|unidir|all}[receive|send] interface ethernet <IFname>
Function:
Enable the debug function of display the packet details. After that, display some kinds of the packet details of
terminal interface.