PLANET XGS3-24040 - Manual (Page 417)

31-130
Switch(config)# interface vlan 1
Switch(Config-if-Vlan1)# ip rip authentication cisco-compatible
Related Command:
ip rip authentication mode
31.17 ip rip receive-packet
Command:
ip rip receive-packet
no ip rip receive-packet
Function:
Set the interface to be able to receivable RIP packets; the “no ip rip receive-packet” command set
the interface to be unable to receivable RIP packets.
Default:
Interface receives RIP packets.
Command Mode:
Interface Configuration Mode.
Example:
Switch# config terminal
Switch(config)# interface vlan 1
Switch(Config-if-Vlan1)# ip rip receive-packet
Related Command:
ip rip send-packet
31.18 ip rip receive version
Command:
ip rip receive version { 1 | 2|1 2 }
no ip rip receive version
Function:
Set the version information of the RIP packets the interface receives. The default version is 2; the
“no ip rip receive version” command restores the value set by using the version command.
Parameter:
1 and 2 respectively stands for RIP version 1 and RIP version 2, 1 2 stands for the RIP versions 1,
2.
Default:
Version 2
Command Mode:
Interface Configuration Mode.