PLANET XGS3-24040 - Manual (Page 61)

XGS3 Command Guide
1-61
1.2.9 telnet server enable
Command:
telnet server enable
no telnet server enable
Function:
Enable the Telnet server function in the switch: the “no telnet server enable” command disables the Telnet function in
the switch.
Default:
Telnet server function is enabled by default.
Command mode:
Global Mode
Usage Guide:
This command is available in Console only. The administrator can use this command to enable or disable the Telnet
client to login to the switch.
Example:
Disable the Telnet server function in the switch.
Switch(config)#no telnet server enable
1.2.10 telnet-server max-connection
Command:
telnet-server max-connection { | default}
Function:
Configure the max connection number supported by the Telnet service of the switch.
Parameters:
: the max connection number supported by the Telnet service, ranging from 5 to 16. The
default option will restore the default configuration.
Default:
The system default value of the max connection number is 5.
Command Mode:
Global Mode
Usage Guide:
None.
Example:
Set the max connection number supported by the Telnet service as 10.
Switch(config)#telnet-server max-connection 10
1.2.11 ssh-server authentication-retries
Command:
ssh-server authentication-retries