PLANET XGS3-24040 - Manual (Page 568)

35-281
Default: None
Command Mode: Admin and configuration mode
Usage Guide: Display messages of specified BGP instance.
Example:
Switch#show ip bgp view as300 100.1.1.0/24
Related Command: router bgp
35.107 show ip bgp view neighbors
Command: show ip bgp view [] neighbors []
Function: Display neighbor messages of specified BGP instance.
Parameter: : Name of BGP instance
: neighbor IP address
Default: None
Command Mode: Admin and configuration mode
Usage Guide: Display neighbor messages of specified BGP instance.
Example:
Switch#show ip bgp view as300 neighbors
35.108 show ip bgp vpnv4
Command: show ip bgp vpnv4 {all|rd |vrf }
Function: Display the BGP VPN routing messages
Parameter: <rd-val> is the route identification label which is normally the （AS number or IP address）:
digits, such as 100:10; <vrf-name> is the name of VRF, created through if vrf <vrf-name> command
Command Mode: All modes
Usage Guide: Available to display by specified RD or VRF.
Example:
Switch#sh ip bgp vpn all
Network Next Hop Metric LocPrf Weight Path
Route Distinguisher: 100:10 (Default for VRF DC1)
*> 11.1.1.0/24 11.1.1.64 0 0 200 ?
*> 20.1.1.0/24 11.1.1.64 0 0 200 ?
35.109 show ipv6 bgp redistribute
Command: show ipv6 bgp redistribute
Function: Show the configuration information of redistribution other out routing to MBGP4+.
Parameter: None.
Default: Not shown by default.
Command Mode: Admin Mode and Configuration Mode.
Usage Guide: None.