PLANET XGS3-24040 - Manual (Page 442)

32-155
Parameter:
is the specific interface name.
Default:
Not configured
Command Mode:
Router mode
Example:
Switch#config terminal
Switch(config)#router ipv6 rip
Switch(config-router)#passive-interface Vlan1
Related Command:
show ipv6 rip
32.15 redistribute
Command:
redistribute {kernel |connected| static| ospf| isis| bgp} [metric<value>] [route-map]
no redistribute {kernel |connected| static| ospf| isis| bgp} [metric<value>] [route-map]
Function:
Introduce the routes learnt from other routing protocols into RIPng.
Parameter:
kernel introduce from kernel routes
connected introduce from direct routes
static introduce from static routes
ospf introduce from IPv6 OSPF routes
isis introduce from IPv6 ISIS routes
bgp introduce from IPv6 BGP routes
<value> is the metric value assigned to the introduced route, ranging between 0-16
is the probe poining to the route map for introducing routes
Command Mode:
Router mode
Example:
Switch#config terminal
Switch(config)#router ipv6 rip
Switch(config-router)#redistribute kernel route-map ip