PLANET XGS3-24040 - Manual (Page 516)

35-229
35.7 bgp bestpath as-path ignore
Command: bgp bestpath as-path ignore
 n o b g p b e s tp a th a s -path ignore
Function: Set to ignore the AS-PATH length. The “no bgp bestpath as-path ignore” command cancels
this configuration.
Parameter: None.
Default: Not set.
Command Mode: BGP route mode
Usage Guide: Length of AS-PATH will be compared in BGP pathing, and its length can be ignored by
using this configuration.
Example:
Set to ignore the AS-PATH length:
Switch(config)#router bgp 200
Switch(config-router)#bgp bestpath as-path ignore
Related Command: bgp bestpath compare-confed-aspath, bgp bestpath compare-routerid, bgp
bestpath med, no bgp bestpath compare-confed-aspath, no bgp bestpath compare-routerid, no
bgp bestpath med
35.8 bgp bestpath compare-confed-aspath
Command: bgp bestpath compare-confed-aspath
no bgp bestpath compare-confed-aspath
Function: Set to concern the confederation AS-PATH length. The “no bgp bestpath
compare-confed-aspath” command cancels this configuration.
Parameter: None.
Default: Not configured.
Command Mode: BGP route mode
Usage Guide: Normally only the length of external AS-PATH will be compared in BGP pathing. By using
this configuration, lengths of AS inner confederation AS-PATH will be compared at the same time.
Example:
Switch(config-router)#bgp bestpath compare-confed-aspath