PLANET XGS3-24040 - Manual (Page 678)

XGS3 Command Guide
39-10
Upstream State
Upstream direction, including
FORWARDING(forwarding upstream data),
PRUNED(Upstream stops forwarding data),
ACKPENDING(waiting for upstream response,
forwarding upstream data)
Origin State
The two states: ORIGINATOR(on transmit
state-refresh state), NON_ORIGINATOR(on
non_transmit state-refresh state)
Local
Join Local position joins interface, the interface
receives IGMP Join
Pruned
PIM prunes interface, the interface receives Prune
messages
Asserted
Asserted state
Outgoing
Multicast data finally exported from interface is
index number, index is 2 in this case. It can check
interface information in detail by commanding
show ip pim interface
39.2.16 show ipv6 pim neighbor
Command: show ipv6 pim neighbor [detail|]
Function: Display router neighbors.
Parameter: None
Default: None
Command Mode: Any Mode
Usage Guide: Display multicast router neighbors maintained by the PIM.
Example:
Switch(config)#show ipv6 pim neighbor
Neighbor Interface Uptime/Expires Ver DR
Address Priority/Mode
Fe80::203:fff:fee3:1244 Vlan1 00:00:10/00:01:35 v2 1 /DR