PLANET XGS3-24040 - Manual (Page 677)

XGS3 Command Guide
39-9
Default: Do not display
Command Mode: Admin Mode
Usage Guide: The command shows PIM-DM multicast forwarding items, namely forwarding items of
forward multicast packet in system FIB table.
Example: Display all of PIM-DM message forwarding items.
Switch(config)#show ipv6 pim mroute dense-mode
IP Multicast Routing Table
(*,G) Entries: 1
(S,G) Entries: 1
(*, ff1e::15)
Local ..l.............................
(2000:10:1:12::11, ff1e::15)
RPF nbr: ::
RPF idx: Vlan12
Upstream State: FORWARDING
Origin State: ORIGINATOR
Local ................................
Pruned ................................
Asserted ................................
Outgoing ..o.............................
Switch#
Displayed Information
Explanations
(*, ff1e::15)
(*,G) Forwaridng item
(2000:10:1:12::11, ff1e::15)
(S,G) Forwarding item
RPF nbr
Backward path neighbor, upstream neighbor of
source direction in DM, 0.0.0.0 expresses the
switch is the first hop.
RPF idx
Interface located in RPF neighbor