PLANET XGS3-24040 - Manual (Page 76)

XGS3 Command Guide
1-76
Global Mode
Usage Guide:
The switch supports up to 4 community strings. It can realize the access-control for specifically community view by
binding the community name to specifically readable view or writable view.
Example:
Add a community string named “private” with read-write permission.
Switch(config)#snmp-server community private rw
Add a community string named “public” with read-only permission.
Switch(config)#snmp-server community public ro
Modify the read-write community string named “private” to read-only.
Switch(config)#snmp-server community private ro
Delete community string “private”.
Switch(config)#no snmp-server community private
Bind the read-only community string “public” to readable view “pviewr”.
Switch(config)#snmp-server community ro public read pviewr
Bind the read-write community string “private” to readable view “pviewr” and writable view “pvieww”.
Switch(config)#snmp-server community rw private read pviewr write pvieww
1.4.12 snmp-server enable
Command:
snmp-server enable
no snmp-server enable
Function:
Enable the SNMP proxy server function on the switch. The “no snmp-server enable” command disables the SNMP
proxy server function
Command mode:
Global mode
Default:
SNMP proxy server function is disabled by system default.
Usage guide:
To perform configuration management on the switch with network manage software, the SNMP proxy server function
has to be enabled with this command.
Example:
Enable the SNMP proxy server function on the switch.
Switch(config)#snmp-server enable