PLANET XGS3-24040 - Manual (Page 135)

8-1
Chapter 8 Commands for LLDP
Function
8.1 lldp enable
Command:
lldp enable
lldp disable
Function:
Globally enable LLDP function; the no operation of this command globally disables LLDP function.
Parameters:
None.
Default:
Disable LLDP function.
Command Mode:
Global Mode.
Usage Guide:
If LLDP function is globally enabled, it will be enabled on every port.
Example:
Enable LLDP function on the switch.
Switch(config)# lldp enable
8.2 lldp enable (Port)
Command:
lldp enable
lldp disable
Function:
Enable the LLDP function module of ports in port configuration mode; the no operation of this
command will disable the LLDP function module of port.
Parameters:
None.
Default:
the LLDP function module of ports is enabled by default in port configuration mode.
Command Mode:
Port Configuration Mode.
Usage Guide:
When LLDP is globally enabled, it will be enabled on every port, the switch on a port is used to
disable this function when it is unnecessary on the port.
Example:
Disable LLDP function of port on the port ethernet 1/5 of the switch.
Switch(config)#in ethernet 1/5