PLANET XGS3-24040 - Manual (Page 528)

35-241
Switch#no debug bgp redistribute route receive
35.34 debug ipv6 bgp redistribute message send
Command: debug ipv6 bgp redistribute message send
no debug ipv6 bgp redistribute message send
Function: To enable debugging switch of sending messages for redistribution of routing information from
external process such as OSPFv3 and others to MBGP4+. The no command will disable the debugging
switch.
Parameter: None.
Default: Close the debug by default.
Command Mode: Admin Mode.
Usage Guide: None.
Example:
Switch# debug ipv6 bgp redistribute message send
35.35 debug ipv6 bgp redistribute route receive
Command: debug ipv6 bgp redistribute route receive
no debug ipv6 bgp redistribute route receive
Function: To enable debugging switch of received messages from NSM for MBGP4+. The no form of
this command will disable debugging switch of received messages from NSM for MBGP4+.
Parameter: None.
Default: Close the debug by default.
Command Mode: Admin Mode.
Usage Guide: None.
Example:
Switch# debug ipv6 bgp redistribute route receive
Switch# no debug ipv6 bgp redistribute route receive
35.36 distance
Command: distance <1-255> []
no distance <1-255> []
Function: Set the manage distance of the routing prefix. The “no distance <1-255>
[]” command restores to the default value.
Parameter: <1-255>: Manage distance.