PLANET XGS3-24040 - Manual (Page 712)

XGS3 Command Guide
39-44
ipv6 multicast-policy 2003::2/64 ff1e::3/64 cos 5
39.6.13 show ipv6 multicast source-control
Command: show ipv6 multicast source-control [detail]
show ipv6 multicast source-control interface > [detail]
Function: Display IPv6 multicast source control configuration.
Parameters: detail: whether to display detailed information.
: Port name.
Default: None.
Command Mode: Admin Mode.
Usage Guide: Use this command to display the configured multicast source control rules, if including the
detail option, it will also display the details of the access-list in use.
Example:
Switch#show ipv6 multicast source-control detail
Ipv6 multicast source-control is enabled
Interface Ethernet 1/1 use multicast source control access-list 8000
ipv6 access-list 8000 permit 2003::2/64 ff1e::3/64
ipv6 access-list 8000 deny 2008::1/64 ff1e::1/64
ipv6 access-list 8000 permit any-source any-destination
39.6.14 show ipv6 multicast source-control access-list
Command: show ipv6 multicast source-control access-list
show ipv6 multicast source-control access-list <8000-8099>
Function: Display the configured IPv6 source control multicast access list.
Parameters: <8000-8099>: Access list number.
Default: None.
Command Mode: Admin Mode.
Usage Guide: Use this command to display the configured source control multicast access list.
Example:
switch#sh ipv6 multicast source-control access-list
ipv6 access-list 8000 permit 2003::2/64 ff1e::3/64
ipv6 access-list 8000 deny 2008::1/64 ff1e::1/64
39.7 Commands for MLD
39.7.1 clear ipv6 mld group
Command: clear ipv6 mld group [ X:X::X:X | IFNAME ]
Function: Delete the group record of the specific group or interface.
Parameters: X:X::X:X the specific group address; IFNAME the specific interface address.
Command Mode: Admin Configuration Mode
Usage Guide: Use show command to check the deleted group record.