PLANET XGS3-24040 - Manual (Page 602)

XGS3 Command Guide
38-31
38.3.37 show ip pim rp-hash
Command: show ip pim rp-hash <A.B.C.D>
Function: Display the RP address of A,B,C,D’s merge point
Parameter: Group address
Default: None
Command Mode: Admin Mode and Global Mode
Usage Guide: Display the RP address corresponding to the specified group address
Example:
Switch (Config-if-Vlan1)#show ip pim rp-hash 239.192.1.10
RP: 10.1.6.1
Info source: 10.1.6.1, via bootstrap
Displayed Information
Explanations
RP
Queried group’sRP
Info source
The source of Bootstrap information
38.3.38 show ip pim rp mapping
Command: show ip pim rp mapping
Function: Display Group-to-RP Mapping and RP.
Parameter: None
Default: None
Command Mode: Admin Mode and Global Mode
Usage Guide: Display the current RP and mapping relationship.
Example:
Switch (Config-if-Vlan1)#show ip pim rp mapping
PIM Group-to-RP Mappings
Group(s): 224.0.0.0/4
RP: 10.1.6.1
Info source: 10.1.6.1, via bootstrap, priority 6
Uptime: 00:11:04
Displayed Information
Explanations