PLANET XGS3-24040 - Manual (Page 316)

24-29
Function:
Specifies the username when binding addresses manually; the “no client-name” command deletes
the username.
Parameters:
is the name of the user, up to 255 characters are allowed.
Command Mode:
DHCP Address Pool Mode
Default:
None
Usage Guide:
Configure a username for the manual binding device, domain should not be included when
configuring username.
Example:
Giving the user, with unique id of 00-10-5a-60-af-12, a username of “network”.
Switch(dhcp-1-config)#client-name network
24.1.7 debug ip dhcp server
Command:
debug ip dhcp server { events | linkage | packets }
no debug ip dhcp server { events | linkage | packets }
Function:
Enables DHCP server debug information: the “no debug ip dhcp server { events | linkage |
packets }” command disables the debug information for DHCP server.
Default:
Debug information is disabled by default.
Command mode:
Admin Mode.
24.1.8 default-router
Command:
default-router <address1>[<address2>[…<address8>]]
no default-router
Function:
Configures default gateway(s) for DHCP clients; the “no default-router” command deletes the
default gateway.
Parameters:
<address1>… are IP addresses, in decimal format.
Default:
No default gateway is configured for DHCP clients by default.