PLANET XGS3-24040 - Manual (Page 283)

17-41
17.5.2 clear arp-cache
Command:
clear arp-cache
Function:
Clears ARP table.
Command mode:
Admin Mode
Usage Guide:
Clears the content of current ARP table, but it does not clear the current static ARP table.
Example:
Switch#clear arp-cache
17.5.3 clear arp traffic
Command:
clear arp traffic
Function:
Clear the statistic information of ARP messages of the switch. For box switches, this command will
only clear statistics of APP messages received and sent from the current boardcard.
Command mode:
Admin Mode
Example:
Switch#clear arp traffic
17.5.4 debug arp
Command:
debug arp {receive|send|state}
no debug arp {receive|send|state}
Function:
Enables the ARP debugging function; the “no debug arp {receive|send|state}” command disables
this debugging function.
Parameter:
receive the debugging-switch of receiving ARP packets of the switch; send the debugging-switch of
sending ARP packets of the switch; state the debugging-switch of APR state changing of the switch.
Default:
ARP debug is disabled by default.
Command mode:
Admin Mode.