PLANET XGS3-24040 - Manual (Page 445)

32-158
32.20 show ipv6 rip interface
Command:
show ipv6 rip interface
Function:
Make sure the interface and line protocols is up.
Command Mode:
Admin mode
Example:
Switch(config)#show ipv6 rip interface
Loopback is up, line protocol is up
RIPng is not enabled on this interface
Vlan1 is up, line protocol is up
Routing Protocol: RIPng
Passive interface: Disabled
Split horizon: Enabled with Poisoned Reversed
IPv6 interface address:
3000:1:1::1/64
fe80::203:fff:fe0c:cda/64
Displayed information
Explanations
Vlan1 is up, line protocol is up
Interface is Up
Routing Protocol: RIP
The routing protocol running on the interface is
RIPng
Passive interface: Disabled
Passive-interface disabled
Split horizon: Enabled with Poisoned Reversed
The split horizon is enabled with poisoned
reversed on the interface.
IP interface address:
3000:1:1::1/64
fe80::203:fff:fe01:429e/64
IPv6 address of the interface