PLANET XGS3-24040 - Manual (Page 237)

14-103
Switch(Config-If-Ethernet1/1)#wrr-queue bandwidth1 1 2 2 4 4 8 8
14.19 wrr-queue cos-map
Command:
wrr-queue cos-map <queue-id>
no wrr-queue cos-map
Function:
Sets the CoS value mapping to the specified queue out; the “no wrr-queue cos-map” command
restores the default setting.
Parameters:
is the ID of queue out, ranging from 1 to 8; are CoS values mapping to
the queue out, ranging from 0-7, up to 8 values are supported.
Default:
efault CoS-to-Egress-Queue Map when QoS is Enabled
CoS Value 0 1 2 3 4 5 6 7
Queue Selected 1 2 3 4 5 6 7 8
Command mode:
Global Mode
Usage Guide:
When global QoS is close by default mapping value.
Example:
Mapping packets with CoS value 2 and 3 to egress queue 1.
Switch(config)#wrr-queue cos-map 1 2 3