PLANET XGS3-24040 - Manual (Page 751)

Commands for Security Function Chapter 2 Commands for 802.1x
42-23
Chapter 42 Commands for 802.1x
42.1 debug dot1x detail
Command: debug dot1x detail {pkt-send | pkt-receive | internal | all | userbased | webbased }
interface [ethernet] <interface-name>
no debug dot1x detail { pkt-send | pkt-receive | internal | all | userbased | webbased }
interface [ethernet] <interface-name>
Function: Enable the debug information of dot1x details; the no operation of this command will disable
that debug information.
Parameters: pkt-send: Enable the debug information of dot1x about sending packets;
pkt-receive: Enable the debug information of dot1x about receiving packets;
internal: Enable the debug information of dot1x about internal details;
all: Enable the debug information of dot1x about all details mentioned above;
userbased: user-based authentication;
webbased: Web-based authentication;
<interface-name>: the name of the interface.
Command Mode: Admin Mode.
Usage Guide: By enabling the debug information of dot1x details, users can check the detailed
processes of the Radius protocol operation, which might help diagnose the cause of faults if there is any.
Example: Enable all debug information of dot1x details on interface1/1.
Switch#debug dot1x detail all interface ethernet1/1
42.2 debug dot1x error
Command: debug dot1x error
no debug dot1x error
Function: Enable the debug information of dot1x about errors; the no operation of this command will
disable that debug information.
Parameters: None.
Command Mode: Admin Mode.
Usage Guide: By enabling the debug information of dot1x about errors, users can check the information
of errors that occur in the processes of the Radius protocol operation, which might help diagnose the
cause of faults if there is any.
Example: Enable the debug information of dot1x about errors.
Switch#debug dot1x error
42.3 debug dot1x fsm
Command: debug dot1x fsm {all | aksm | asm | basm | ratsm} interface
no debug dot1x fsm {all | aksm | asm | basm | ratsm} interface
Function: Enable the debug information of dot1x state machine; the no operation of this command will
disable that debug information.