PLANET XGS3-24040 - Manual (Page 542)

35-255
35.60 neighbor override-capability
Command: neighbor {|} override-capability
no neighbor {|} override-capability
Function: Whether enable overriding capability negotiation. The “no neighbor {|}
override-capability” command restores the capability negotiation.
Parameter: : Neighbor IP address.
: Name of the peer group.
Default: Disabled.
Command Mode: BGP route mode
Usage Guide: With this attribute, error notify due to unsupported capability negotiation the neighbors
required will not be sent.
Example:
Switch(config-router)#neighbor 10.1.1.64 override-capability
Related Command: neighbor capability
35.61 neighbor passive
Command: neighbor {|} passive
no neighbor {|} passive
Function: Configure whether the connecting request is positively sent in the connection with specified
neighbor; the “no neighbor {|} passive” command restores to positively send the
connecting request.
Parameter: : Neighbor IP address.
: Name of peer group.
Default: Positively send the connecting request.
Command Mode: BGP route mode and address-family mode
Usage Guide: With this attribute set, the local side will not positively send the TCP connecting request
after the neighbors are configured, but stays in listening mode waiting for the connecting request from
partners.
Example:
Switch(config-router)#neighbor 10.1.1.64 passive
After configured with this attribute and reestablishing the connection , the local side do not attempt to
create connection but stays in ACTIVE state waiting for the TCP connection request from the partner.