PLANET XGS3-24040 - Manual (Page 485)

33-198
Default:
Not displayed
Command Mode:
Admin and configuration mode
Usage Guide:
OSPF neighbor state can be checked by viewing the output of this command.
Example:
Switch#show ip ospf neighbor
OSPF process 0:
Neighbor ID Pri State Dead Time Address Interface
192.168.1.1 1 Full/Backup 00:00:32 6.1.1.1 Vlan1
192.168.1.3 1 Full/DR 00:00:36 20.1.1.3 Vlan2
192.168.1.3 1 Full/ - 00:00:30 20.1.1.3 VLINK2
Displayed information
Explanation
Neighbor ID
ID Neighbor ID
Priority
Priority
State
Neighbor relation state
Dead time
Neighbor dead time
Address
Interface Address
Interface
Interface name
33.58 show ip ospf redistribute
Command:
show ip ospf [] redistribute
Function:
To display the routing message redistributed from external process of OSPF.
Parameter:
is the process ID ranging between 0~65535.