PLANET XGS3-24040 - Manual (Page 839)

Commands for Network Time Management Chapter 1 Commands for SNTP
59-2
Switch#config
Switch(config)#sntp polltime128
59.4 sntp timezone
Command: sntp timezone [{add | subtract}] []
no sntp timezone
Function: Set the difference between local time and UTC time. The no operation of this command
cancels the configuration timezone and restores the default value.
Parameter: <name> is the name of local timezone, consist of max 16 characters. means the
timezone equals the UTC time add .means the timezone equals the UTC
time subtract .<time-difference> is the time difference to UTC time, range from 0 to
12,the default value is 8 .
Default: Add 8 is default timezone.
Command Mode: Global Mode
Example: Set the timezone Beijing.
Switch#config
Switch(config)#sntp timezone beijing add 8
59.5 show sntp
Command: show sntp
Function: Displays current SNTP client configuration and server status.
Parameters: N/A.
Command Mode: Admin and Configuration Mode.
Example: Displaying current SNTP configuration.
Switch#show sntp
SNTP server Version Last Receive
2.1.0.2 1 6