11 lldp toomanyneighbors, 12 show lldp, Lldp too – PLANET XGS3-24040 User Manual
Page 140: Eighbors, Show lldp
8-6
Function:
Set the maximum number of entries can be stored in Remote MIB.
Parameters:
<value> is the configured number of entries, ranging from 5 to 500.
Default:
The maximum number of entries can be stored in Remote MIB is 100.
Command Mode:
Port Configuration Mode.
Usage Guide:
The maximum number of entries can be stored in Remote MIB.
Example:
Set the Remote as 200 on port ethernet 1/5 of the switch.
Switch(config)#in ethernet 1/5
Switch(Config-if-ethernet 1/5)# lldp neighbors max-num 200
8.11 lldp tooManyNeighbors
Command:
lldp tooManyNeighbors {discard|delete}
Function:
Set which operation will be done when the Remote Table is full.
Parameters:
discard: discard the current message.
delete: Delete the message with the least TTL in the Remoter Table.
Default:
Discard.
Command Mode:
Port Configuration Mode.
Usage Guide:
When the Remote MIB is full, Discard means to discard the received message; Delete means to the
message with the least TTL in the Remoter Table.
Example:
Set port ethernet 1/5 of the switch as delete.
Switch(config)#in ethernet 1/5
Switch(Config-if-ethernet 1/5)# lldp tooManyNeighbors delete
8.12 show lldp
Command:
show lldp