PLANET XGS3-24040 - Manual (Page 478)

33-191
Command Mode:
OSPF Protocol Mode.
Example:
Switch#config terminal
Switch(config)#router ospf
Switch(config-router)#overflow database 10000 soft
33.48 overflow database external
Command:
overflow database external [ ]
no overflow database external [ ]
Function:
The command is for configuring the size of external link database and the waiting time before the
route exits overflow state. The “no overflow database external [ ]”
restores the default value.
Parameter:
< maxdbsize > size of external link database, ranging between 0~4294967294, defaulted at
4294967294.
< maxtime > the seconds the router has to wait before exiting the database overflow, ranging
between 0~65535.
Command Mode:
OSPF protocol mode
Example:
Switch#config terminal
Switch(config)#router ospf
Switch(config-router)#overflow database external 5 3
33.49 passive-interface
Command:
passive-interface
no passive-interface
Function:
Configure that the hello group not sent on specific interfaces. The “no
passive-interface“command cancels this function.
Parameter:
is the specific name of interface.