PLANET XGS3-24040 - Manual (Page 558)

35-271
Default: None.
Command Mode: Admin and configuration mode
Usage Guide: We can display BGP routing messages by different parameters (such as address-family
or IPv4 address), or a route covered by a prefix, or only the routing message don’t match the earliest IP
address-family (namely the route is not A or B or C type address.)
Example:
Switch#show ip bgp
BGP table version is 147, local router ID is 10.1.1.64
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 12.0.0.0 10.1.1.121 0 32768 ?
*> 100.1.1.0/24 10.1.1.200 0 32768 ?
*> 100.1.2.0/24 10.1.1.200 0 32768 ?
*> 172.0.0.0/8 0.0.0.0 32768 i
Total number of prefixes 4
35.91 show ip bgp attribute-info
Command: show ip bgp attribute-info
Function: Display the BGP attributes messages.
Parameter: None.
Default: None.
Command Mode: Admin and configuration mode.
Usage Guide: For displaying the attribute messages permitted by BGP.
Example:
Switch#sh ip bgp attribute-info
attr[1] nexthop 0.0.0.0
attr[1] nexthop 10.1.1.64
attr[3] nexthop 10.1.1.64
attr[1] nexthop 10.1.1.121
attr[2] nexthop 10.1.1.200
35.92 show ip bgp community
Command: show ip bgp [] community [exact-match]
Function: For displaying route permitted by BGP with community information.
Parameter: : Address-family, such as “ipv4 unicast”
: Community attributes number show in AA:NN form or combination of local-AS,
no-advertise, and no-export.
Default: None