PLANET XGS3-24040 - Manual (Page 213)

13-79
Cost from the current port to the region
root of the current instance
State
Port status of the current instance
Role
Port role of the current instance
DsgBridge
Upward designated bridge of the current
port in the current instance
DsgPort
Upward designated port of the current port
in the current instance
13.2.2 show spanning-tree mst config
Command:
show spanning-tree mst config
Function:
Display the configuration of the MSTP in the Admin mode.
Command mode:
Admin Mode
Usage Guide:
In the Admin mode, this command can show the parameters of the MSTP configuration such as
MSTP name, revision, VLAN and instance mapping.
Example:
Display the configuration of the MSTP on the switch.
Switch#show spanning-tree mst config
Name switch
Revision 0
Instance Vlans Mapped
----------------------------------
00 1-29, 31-39, 41-4094
03 30
04 40
----------------------------------
13.2.3 show mst-pending