PLANET XGS3-24040 - Manual (Page 527)

35-240
Default: None
Command Mode: Admin mode and global mode
Usage Guide: For monitoring BGP events and the encountered errors, warning messages.
Example:
Switch#debug bgp all
35.32 debug bgp redistribute message send
Command: debug bgp redistribute message send
no debug bgp redistribute message send
Function: To enable debugging switch of sending messages for redistribution of routing information from
external process such as OSPF and RIP to BGP. The no command will disable the debugging switch.
Parameter: None.
Default: Close the debug by default.
Command Mode: Admin Mode.
Usage Guide: None.
Example:
Switch# debug bgp redistribute message send
Switch# no debug bgp redistribute message send
35.33 debug bgp redistribute route receive
Command: debug bgp redistribute route receive
no debug bgp redistribute route receive
Function: To enable debugging switch of received messages from NSM for BGP. The no form of this
command will disable debugging switch of received messages from NSM for BGP.
Parameter: None.
Default: Close the debug by default.
Command Mode: Admin Mode.
Usage Guide: None.
Example:
Switch#debug bgp redistribute route receive