Ag Leader InSight Ver.8.0 Users Manual User Manual
Page 97
83
T
ILLAGE
• Field button
The Field button functionality changes based upon the status of the master switch. If the master is off it
allows you to change grower, farm, field, and configuration. If the master status is on it allows you to view
field totals. For more information, see
“Field Button (While Not Logging)” on page
• Region button
Press to change and name regions of the field. For more information, see
.
• System button
Press to access diagnostic information about the internal memory, display information, and CAN module
information.
• DGPS button
• AutoSwath check box
The AutoSwath feature automatically increases or decreases the logged width of the tillage equipment
according to your field's boundaries and previously-tilled areas. Check the AutoSwath check box to enable
the AutoSwath feature. For more information, see
“Automatic Swath Control, Run Screen Operation” on
.
Note: You must have an unlock code to activate the AutoSwath feature. If you have been using AutoSwath
with the DirectCommand™ system, the feature is already activated and ready to use. If you have not unlocked
the AutoSwath feature yet, the code can be purchased through your local Ag Leader dealer.
The master button controls area logging. When the switch is set to green area is being recorded
and displayed on the map.