Ag Leader InSight Ver.8.0 Users Manual - Manual (Page 73)

59
G
UIDANCE
I
MPORTING
V
EHICLE
C
ONFIGURATION
P
ROFILES
The following procedure allows you to download the vehicle profile from the compact flash card onto the
display's internal memory.
Choose the Configuration File to Import
At the Autopilot tab on the GPS screen, press the Vehicle
Management button. When the Vehicle Profile Management
screen appears, press and highlight the vehicle profile you wish
to export that is shown in the Configuration Name window.
Press the Import from Card button.
Accept the File Selection
The File Selection window appears.
Press Accept.
Accept the Vehicle Profile
Note: If the name of the vehicle configuration file you wish to import already exists in the display, a message
will appear asking you to rename the new configuration file.
The Vehicle Profile window appears, as shown at left. A message in this window states "Successfully imported."
Press OK.
R
EMOVING
V
EHICLE
C
ONFIGURATION
P
ROFILES
The following procedure removes the vehicle configuration profile from the internal memory of the
display.
Note: This procedure will not remove the vehicle profile from either the compact flash card or the Nav
Controller.
1. Chose the Configuration File to Remove from Memory
At the Autopilot tab on the GPS screen, press the Vehicle
Management button. When the Vehicle Profile Management
screen appears, press and highlight the vehicle profile you wish
to export that is shown in the Configuration Name window. Then
press the Remove From Memory button.
2. Delete the File
The Delete File window appears, as shown at left. Press the Accept button to permanently erase your file
from the display's memory.