Ag Leader InSight Ver.8.0 Users Manual - Manual (Page 312)

298
3. Retire Old Calibration
The Retire Calibration warning window appears, as shown at
left. Press the
Yes button to retire your old calibration.
Note: By retiring your old calibration, you will not be able to return to your old calibration, or add data to it.
4. New Calibration Appears
The new calibration now appears on the Calibration drop-
down menu. Your calibrations, past and present, are
numbered in the order in which they were created. The
calibration's date of creation appears to the right of the name.
5. Perform new Weight Calibration
After you have created a new calibration, it is recommended
that you perform another Weight Calibration. Refer to the
procedure described on
“Weight Calibration” on page 295 .
R
UN
S
CREEN
O
PERATION
R
UN SCREEN BUTTONS
Note: Before beginning Run Screen operations, you must first go to the Field button and accept a field,
configuration, crop, and region. See the Field Button description for more information.
• FIELD button
Flunctionality changes, based upon the status of the separator. If
the separator is off, it allows you to change Grower, Farm, Field,
and Configuration. If the separator is on, it allows you to view field
totals. For detailed information, see
“Field Button (While Not
Logging)” on page 300 and “Field Button (While Logging)” on
page 303 .
• REGION button
Change and name regions of the field, and track and change
varieties. For more information, see
“Region Selection” on
page 300 .
• SYSTEM button
Press to access diagnostic information about the internal memory, display information, CAN module
information., and diagnostic information for harvest. For more information see
“System Diagnostic Button”
on page 307.