Field button (while not logging), Information, see, And also – Ag Leader InSight Ver.8.0 Users Manual User Manual
Page 233: Ield, Utton, Hile, Ogging
219
A
PPLICATION
On Spinner Spreader and Strip Till configurations, the channel indicators display
the status of the product control channel. When the fertilizer bin icon is grey, no
product application is taking place. When product is being applied, the fertilizer bin
will turn green.
Spinner Spreader operators who wish to read more information should see
“Spinner Spreader Application Rate Control Tab” on page
Strip-Till application operators who wish to read more information should see
“Strip Till Application Rate Control Tab” on page
.
On DirectCommand configurations you will see the Target Rate button displayed.
Press the Target Rate button to see the Target Rate window, which shows
product application rate settings and rate control settings. For more information,
see
The Master Switch Indicator shows if the master switch is on (green) or off (red). The master
switch is shown in the F1 position on the Auxiliary Input Settings window. For more
information, see
“Auxiliary Input Settings (DirectCommand)” on page
F
IELD
B
UTTON
(W
HILE
N
OT
L
OGGING
)
The start of an application in a field is accomplished by setting up a Field Operation at the Run screen.
This process is similar regardless of the type of field operation currently taking place. To begin, press the
FIELD button to launch the Field Operation Wizard.
1. Select Grower, Farm, Field
Choose the field for application by making the proper
selections from the Grower, Farm, and Field list boxes.
If the Filter Fields by Farm check is cleared, the display will
show all fields in the Field list box regardless of what farm the
fields are associated with.
Press NEXT to continue.
Note: You may view Field Totals by pressing the Field Totals button on the Field Operation Wizard. For more
information on field totals, see
“Field Button (While Logging)” on page
2. Choose Configuration
The Field Operation Wizard appears. Select the Operating Configuration that relates to the equipment in
use. Vehicle and Controller information is also displayed in this window.
Press NEXT to continue.