Ag Leader InSight Ver.8.0 Users Manual - Manual (Page 264)

250
The container level’s percentage and current amount is also
shown at the bottom left-hand side of the Field Totals
window.
To display the Field Totals window, press the Field button on the
Run Screen while data is being logged in the field.
Low Container Level Warning
The Container Level Warning appears when spray solution
tank level counts down to a specified percentage or liquid
measurement of the container’s capacity.
• When this warning occurs, refill your tank as necessary. As you refill
your tank, you should follow the Fill/Empty event procedure described
at
“Fill/Empty Events” on page 250 .
• You can adjust this warning level by pressing the bell icon on the
Fill/Empty event window. For more information, see
“Optional Step:
Set Low Container Level Settings” on page 251 .
F
ILL
/E
MPTY
E
VENTS
When filling or emptying the solution spray tank, you may update the amount shown on the display’s run
screen by using the following procedure.
1. Press Fill/Empty button
On the Run screen’s Field Notes tab, press the Fill Empty
button to display the container Fill Empty Event window.
2. Edit Fill/Empty Event information
The Fill/Empty window appears. Use the buttons on the right-
hand side of this window to perform the following tasks:
Press Edit Level to select an Event Type to enter into the
display, such as Fill, Empty, Partial Fill, or Partial Empty. For
more detail, see
“Choose Fill/Empty Event Type” on page 251 .