Ag Leader PFadvantage Mid-Tech Controllers Quick Reference Sheets - Manual

PF3000 and PF3000 Pro – Application Rate Mode - Quick Reference Menu Tree for Mid-Tech controllers with Data-Link– March 2002
Menu Key
FIELD LOAD OPTIONS SHOW MAP
CAL SETUP DIAG
Press Menu Key to switch between Main Menu keys
OPTIONS
LIGHTBAR MARKS NAVIGATE BOUNDARY GRID
AREA PT CLR/STOP ADD/STRT PAUSE RESET SET B SET A
FIELD
VIEW
CONFIG
[Create or change field and name field
functions. Active configuration for
field displayed.]
[Set active configuration and active
tgt prescription file.]
ACTIVE
ON/OFF
EDIT
TGT FILE
[Select and accept new tgt
prescription file.]
VIEW
INFO
LOAD SHOW MAP
[Create or change load and
name load functions.] [Splits screen and shows On
Screen Map on left side.
Press HIDE MAP key to
return to full screen. ]
Used for
Headlands.
See Lightbar
Manual. Used for
Headlands.
See Lightbar
Manual. Press at every
corner of field to
calculate field
area. Must have
“Field Area”
displayed on
main screen to
see area.
[Screen displays field, product, units/ac and default
rate stored in tgt file.]
Press at
beginning of
guidance
reference
pass. Press at end
of guidance
reference
pass. When
using curve
pattern,
press at end
of every
pass. Press to
reset
guidance
and area
points to
start a new
field. Press to
pause
guidance
when filling
applicator.
Drive back
to swath and
press
RESUME
key.
Revision 2 1 of 4 P.N. 2002831-18