Ag Leader InSight Ver.8.0 Users Manual - Manual (Page 252)

238
• Press Repeat Calibration to begin the process again.
• Press Finish to save the value and exit the calibration routine.
10. Restart spinner hydraulic circuit
Restart the spinner hydraulic circuit.
A warning will appear when exiting the calibration wizard, instructing you to return the spinner control
hydraulic circuit to a field-ready condition.
WARNING: Make sure the spinner is free of material before restarting the spinner hydraulic circuit.
Spinner Spreader In-Field Conveyor Calibration
The In-Field Conveyor Calibration procedure performs an automated routine to adjust the calibration
number for the selected spinner bin. This calibration is performed if there is a difference between the
amount of product logged as compared to what was actually applied. To do an In-Field Calibration
procedure, press the In-Field Calibration button on the Spreader Control window. The In-Field Conveyor
Rate Calibration Wizard appears, as shown.
1. Select Conveyor to Calibrate
Select the channel to calibrate, and press NEXT.
2. Enter Actual Weight
The Accumulated Weight is shown in the top portion of the
window.
Use the numeric keypad to enter the Actual Weight, and press
NEXT.
3. Calibration Complete
A message appears, stating that your calibration is complete,
and showing the CFR amount in cubic feet per revolution.
Press Finish.
Spinner Spreader Chain Lube
If you are using a Fan Frame & Feed Gate Actuator, you can automatically perform a chain oiling routine
by pressing the Chain Lube button on the Spreader Control window and following the steps below.
Note: Perform a chain oiling routine daily.
1. Acknowledge the first warning. Manually disable or shut off the spinner hydraulic circuit.
2. Enter a Routine Duration. Enter the routine time that it takes to turn the conveyor one revolution.
3. Press Start. Press the Start button, and when the routine is finished press OK.
4. Acknowledge the second warning. Return the spinner hydraulic control to a field-ready condition.