Ag Leader InSight Ver.8.0 Users Manual - Manual (Page 72)

58
The File Name window appears, as shown at left. Use the
keypad to enter the new Vehicle Profile file name.
Press Accept.
R
ESTORING
V
EHICLE
C
ONFIGURATION
P
ROFILES
The following procedure allows you to send a vehicle configuration (.cfg) profile saved in the display’s
internal memory to a Nav Controller.
1. Choose vehicle configuration profile
At the Autopilot tab on the GPS screen, press the Vehicle
Management button. When the Vehicle Profile Management
screen appears, press and highlight the vehicle profile you wish
to export that is shown in the Configuration Name window.
Press the Restore to Controller button.
2. Accept the Restore File operation
The Restore File window shows, as appears as left.
Press the Accept button.
3. Accept the Autopilot Liability Notice
A message appears stating "Configuration Successfully Restored." When you receive this message, the
Nav Controller reboots. The Autopilot Liability Notice appears.
Press the Accept button.
E
XPORTING
V
EHICLE
C
ONFIGURATION
P
ROFILES
This procedure allows you to export a .cfg (vehicle configuration) file that has been saved in the internal
memory of the display onto the compact flash card when it is in the display.
1. Choose the Configuration File to Export
At the Autopilot tab on the GPS screen, press the Vehicle
Management button. When the Vehicle Profile Management
screen appears, press and highlight the vehicle profile you wish
to export that is shown in the Configuration Name window.
Press the Export to Card button.
2. Export either one or all files
A message appears, asking if you would like to export the selected
file, or all files.
Press either the Selected File or All Files button.
3. Confirm Configuration Export
A message appears, stating "Configuration Successfully Exported." Press OK.