Ag Leader InSight Direct Injection - Manual

PN ?????? Rev A
PN 2006313 Rev A 1
1
DirectCommand
TM
Direct Injection
Quick Reference Guide
AL: 2006311 - ENG Rev B
Controller Settings screen
Pump Calibration
Factory Calibration
number found on pump speed sensor, pulses/10
fluid ounces, divide by 10 and enter number, once
entered, number should not be changed
Perform Calibration
pump will not run until calibrated, calibrate at
beginning of season and when repairs are made
Rate Response Warning
Error Threshold and Error Delay
duration and error allowed before alarm is
displayed
Flow Monitor Warning
Error Threshold
percentage of perceived application error allowed
before displaying flow sensor warnings
Enable Warning
option of displaying Flow Monitor Warning
Create Configuration
Enter Settings
There is a tab for each pump
Start of Configuration wizard
Press to Highlight Configuration
4930rx
Application
Configuration Product
Application
Configuration Setup
1 2 4 3
Controller Settings
Factory
Calibration
Pump Calibration
10 pls/fl oz
Flow Monitor Warning
10.07 pls/fl oz
Active Calibration
Perform
Calibration
Rate Response Warning
Error
Threshold
Error Delay
Error
Threshold
Enable Warning
25 %
5 s
30 %